Image : http://www.flickr.com
If we started more than 2GB of RAM on your Netbook you will probably glanced at some forums and read comments from users and get more confused When you started.
CL concepts as you have seen 667 or 800 MHz ECC not made you wonder what kind of memory you need. Well, these numbers are important, and only some are compatible with your netbook. Best-selling and top rated> Memory stick 2GB netbooks is crucial, so I mark with very reliable, but that goes for all brands.
The first thing to know is that most modern netbooks (and 95% of them, including Asus, Acer, etc.), use the Atom processor, a 667MHz front-side bus speed (for the N280, N270, which has is 533). Here the memory of going through the processor to use it. This tells us that even if the memory is displayed in the list of 800 MHzdoes not help anything to use the computer to get to 667 (or 533) MHz, and on some computers do not like to undermine it.
Another important thing is to ensure that the RAM you can see, non-ECC, and, of course, 200-pin SO-DIMM. This means, essentially, that fits your laptop or netbook.
The third thing to check is CL or CS latency. This is basically how fast the RAM can be used, or time delay. The lower the csLatency number, the better. There are two types of bestseller Crucial RAM probably you and if you are with a 800 MHz CL = 6, while the other at 667 MHz with CL = 5
Their prices are only a few dollars, and most people think the way to 800 MHz is faster, but in reality, if the team watches under 667 then the second is faster because it has a low latency cs. This is what I went through and had no problems and I would saya 50% improvement in speed and applications.
Now that you know to get the type of RAM, here's a guide on how to install it.
Step 1: Get the right RAM. Igot Crucial 2GB 667 stick for $ 30 at Amazon.
Step 2: Turn off your computer and remove the battery.
Step 3: Remove the door of memory (mine was a small picture of a RAM card at the door).
Step 4: Press the two metal clips from the Memory Stick
This memory is used to display:
Step 5:remove, replace, and 1GB Memory Stick 2 GB sticks. Make sure that the pins are aligned (in one direction). The label is essential in the background.
Step 6: Press Metal to RAM, click the clip, the cover, insert the battery and restart the computer. If you then, that XP will automatically detect the RAM and no further action is needed.
Step 7: When the computer starts Hit (Windows key + Pause) to view the system properties and make sure that the newRecognition memory.
If so, then you're done, you do not have to restart, while pressing the F8 key repeatedly to select to open the BIOS menu, then the new RAM in the computer to recognize it. Enjoy.
Visit : Cheap Online Shopping Store Pet supplies store Bike accessories store latest netbook cheapest netbook netbook 10inch
Raul Buck